Review

Some Features of Star Dialer from StarComm

This is a review post about another popular Mobile Dialer software named Star Dialer. StarDialer is an application or softphone that allows end users to make VoIP phone calls from the mobile phones (mVoIP) using Internet connection through GPRS, 3G, EDGE, WiFi etc. It gives you the convenience to make VoIP calls from your mobile handset bypassing the expensive route inherently provided by the cellular networks as with compatible handsets. StarDialer not only allows you to make VoIP calls with your chosen provider penetrating though the networks that are blocked by ISP/Telco firewalls but allows you to save the expensive bandwidth cost by passing the calls through the StarDialer encrypted compression tunnels. StarDialer has successfully passed all the required tests provided by the Symbian Global Test Center.

StarDialer products and services were developed by the in house IT division StarComm, LLC which consists of developers, programmers and software engineers. StarComm, LLC is a facilities based communications service provider for international and domestic carrier services as well as web-enabled enhanced telecommunication services.

Some popular Features of StarDialer are as follows:

• User friendly interface.

• Supports Balance Display and can be heard by listening to IVR.

• Last Call Duration remains in screen unless the Dialer restarts or made another call by user.

• Rate Option display (Destination, Dial Code, Price per Minute and Total Minute for certain destination, Remaining Talk Time).

• Show last Ten Calls History with Call Duration.

• The Mobile Dialer can make call from mobile phone’s address book.

• Customizable and Transparent Background (Customize the Dialer background screen by using any favorite Handset Theme or own Branding).

• Support DTMF Signaling.

• Support both Incoming and Outgoing VoIP calls.

• Works with SIP Protocol and supported all SIP Switches.

• Voice quality is calibrated with CNG (Comfort Noise Generation), VAD (Voice Activity Detection) and PLC (Packet Loss Concealment) to ensure the crystal clear voice quality.

• StarDialer use Defined Profile Ring Tone for Incoming Call. It also capable to Vibrate if the Vibration Mode is set on the profile. It also works in Silent Mode if Silent mode is chosen in profile.

• Support G.729, GSM and G.711 Codec system.

• Works with EDGE, GPRS, Wi-Fi, VPN Access points and Bluetooth for internet connectivity.

• Works behind NAT or on Private IP.

• When the Dialer is used in conjunction with StarDialer Tunnel, it saves over 50% Packets that saves lots of Bytes.

• Works from any type of Firewalled / Blocked network and SIP based Switches.

• IP to IP call support for internal communication, user to user free and low cost call facility.

• Refill Option to recharge an Active Account.

• Support Hands Free Call.

• Speakerphone / Loud Speaker On/Off during conversation.

• Emergency Exit any time (While calling or Dialer in standby mode).

• Emergency switch to another application while talking with Mobile Dialer.

• Browse and Run any other application of your handset while talking with Mobile Dialer.

• Calling option in Offline Mode (Mobile Dialer can run with GSM SIM if handset supports Wi-Fi).

• GSM Call Alert while VoIP call running, GSM Call Receive while VoIP call running and GSM Call Ignore while VoIP call running.

• Phones memory, both external and internal is same for Mobile Dialer installation and operation.

• Network Status indicates by “Ready” or “Log off”.

• Installation Flexibility (Never conflict with another application).

• Rock solid stability.

• This software will run on the Phone having Symbian OS.

• Bugs free and very easy to use.

Some Upcoming Features of StarDialer:

• It will support the Dialer to monitor the network by itself as when the handset is out of networks, it disconnects and will reconnect when reenters to network. It will not require restarting.

• Will support Windows Mobile OS.

• Will support Codec AMR.

• Will support downloading the New Version Automatically.

• Will support the Refill Option to recharge as an active account.

Thanks a lot for reading, for further details please visit the web portal of Star Dialer.

other related:

HelloByte Mobile Dialer is getting Popularity

ZemPlus and Speako Mobile Dialer from SpinyTel

GMS Mobile Dialer supports on many OS Platform

SIMPLE Dialer from DIVINE Informatics Limited

24Dialer – mVoIP Application to make Phone Calls

Pronto Dialer – SIP based MVoIP Application

About iTel Mobile Dialer Express and Hybrid Dialer

Mir Technologies introduced mTel Dialer

MoSIP Dialer – SIP based Application from VoxValley

Knight Dialer provide Crystal Clear Voice Quality

Cool Mobile Dialer from Synchronous

gPlex Mobile Dialer and it’s Key Features

Wholesale A 2 Z Destination Route

Pioneer Mobile Dialer in Bangladesh

Quality White CLI route at Flexible rate

Quality CLI and Non-CLI Route Provider

Mobile Dialer for KSA, Dubai-UAE, Oman, Qatar and others

About Cool Mobile Dialer from Synchronus

CoolDialer is a mobile dialer application (SoftPhone) for mobile VoIP (mVoIP) which is developed to make VoIP calls using supported mobile handsets using EDGE, GPRS, 3G, 3.5G, 4G / LTE and Wi-Fi Internet connection. Cool Dialer allows making VoIP calls using G729 codec system with SIP protocol. Quality of service is the key to success in VoIP business. Cool Dialer crystal clear voice by managing CNG (Comfort Noise Generation), VAD (Voice Activity Detection) and PLC (Packet Loss Concealment) properly. Having superior control over network, this mobile dialer gives you a hassle free user experience.

CoolDialer have its proprietary anti firewall technology to avoid all sort of firewalls which makes it working from every place of the world. It has multiple stage protection plans against firewalls. It’s superior bandwidth saving technology ensures it works from worst bandwidth situations where 3G is not available or not working as expected, or under congested network. CoolDialer mobile dialer is developed by Synchronous, the developer of SyncSwitch and many other customized VoIP software.

Some Technical Features of Cool Dialer:

• Able to make call with extremely low bandwidth situation.
• Flexibility of switching silence suppression ON and OFF from the dialer.
• Works behind NAT.
• Works from any type of firewalled / blocked network across the Globe.
• Works with any standard softswitch with SIP protocol.
• Voice quality is calibrated with CNG (Comfort Noise Generation), VAD (Voice Activity Detection) and PLC (Packet Loss Concealment) to ensure crystal clear voice.
• Works with EDGE, GPRS, Wi-Fi, 3G, 3.5G, 4G / HSPDA / LTE and VPN Access points.
• Improved voice quality and network management.

Usability and Interface related features of CoolDialer:

• User friendly interface with all needed information of a call such as Balance with currency, Registration Status, Call Status, Last called number, Last call duration, etc.
• Since last called number is on the screen, users can redial by just pressing the dial button.
• Auto Start feature start the dialer automatically when mobile phone is switched ON. This feature can be controlled from Option menu.
• Loud Speaker access while calling.
• Shows available balance after registration and update instantly after finishing any call
• CoolDialer runs just like your Phonebook or Call records or Organizer – without disturbing any other application to run. You can keep it open all time behind other applications.
• When you are in a VoIP call with CoolDialer, if you got a GSM call from your mobile network, the call will hang-up instantly and you will be able to receive the GSM call.
• It doesn’t hamper emergency call (i.e. 911, 112 etc) of your handset.
• You can put your motto, slogan, website address or any other message at the bottom of the screen, which enables you to express your service better to your customers.
• Brand name at the top of the screen gives you opportunity to display your brand name.
• Users can dial directly from phone book, which set them free from memorizing the number and dialing again and again.
• It removes leading ‘+’ character automatically from phonebook entry while dialing, thus you don’t need to edit saved number.
• Silence Suppression settings also can be changed from this menu. If silence suppression is enabled, it saves bandwidth by transmitting less data which results low bandwidth consumption and better voice quality.
• Call History in Option menu save up to 50 call history with dialed number and duration. Users can check the history any time and redial from history by selecting the number.
• Easy accessible settings menu provides customer flexibility to change user name and password any time.
• Call interception facilities provides flexibility to dial directly from phone interface with a predefined prefix through CoolDialer. For example, if you have ‘+’ or ’00’ as your interception prefix set on the CoolDialer, when the dialer is running in background, and a number is dialed from phone interface with ‘+’ or ’00’, this call will go through CoolDialer, other than directly through your operator. User can set any prefix as interception code. If anyone doesn’t want this feature, all prefixes can be removed from here.

Thanks a lot. For further details please visit the website of Cool Dialer.

other related:

HelloByte Mobile Dialer is getting Popularity

ZemPlus and Speako Mobile Dialer from SpinyTel

GMS Mobile Dialer supports on many OS Platform

24Dialer – mVoIP Application to make Phone Calls

SIMPLE Dialer from DIVINE Informatics Limited

Pronto Dialer – SIP based MVoIP Application

About iTel Mobile Dialer Express and Hybrid Dialer

Mir Technologies introduced mTel Dialer

Knight Dialer provide Crystal Clear Voice Quality

MoSIP Dialer – SIP based Application from VoxValley

Some Features of Star Dialer

gPlex Mobile Dialer and it’s Key Features

Wholesale A 2 Z Destination Route

Pioneer Mobile Dialer in Bangladesh

Quality White CLI route at Flexible rate

Quality CLI and Non-CLI Route Provider

Mobile Dialer for KSA, Dubai-UAE, Oman, Qatar and others

SIP Mobile Dialer for Small and Mid size VoIP Business

SIP Mobile Dialer is a popular software that allows to create branded and featured version of mobile VoIP and IM chat application. SIP Mobile Dialer is designed for small and mid size VoIP/SIP providers or other businesses who want to join mobile VoIP and IM markets.

Why you use SIP Mobile Dialer?
SIP Mobile Dialer is Easy to use. It provides a crystal clear voice quality. No charges for busy or engaged calls. Full branding option. Improved features and functions at low cost. More secured than ever before. Bandwidth saver for low bandwidth areas. Support wide range of handsets (Nokia Symbian 3rd Edition etc).

Some Key Features of SIP Mobile Dialer:

• User friendly interface

• Unpredictable Branded Dialer offering on demand customization

• Authentic best promising solution

• Flexible integration with your Phone Book contacts

• Compatible with all kind Soft Switches, supporting SIP

• Most satisfactory Anti-Block Solution

• Pin Security service without any extra cost

• Able to bypass any kind of Firewall

• Support Incoming & Outgoing call

• Display Balance

• No extra Balance server is required

• Unique tunneling

• QoS for VoIP Calls

• Dialed / Received Call History

• Refill Account

• Call timer

• It works from any block or unblock country as UAE, OMAN, KSA etc.

• Most popular platform: Symbian OS Support

• Windows Mobile 5 & 6, Android & iPhone dialer (coming soon)

Technical Outline SIP Mobile Dialer:

• Use SIP Initiation Protocol

• Support G729, AMR, ILBC, GSM, Speex, G711 codec

• Compatible with EDGE, GPRS, Wi-Fi and VPN Access points

• Consumes very low bandwidth (10kbps) on g.729 codec

• Improved Jitter Buffer for low speed internet

• Dynamic PTime negotiate with remote endpoint

• Scalable Mediation Platform

• NAT Traversal or Private IP address

• IVR (interactive voice response) Support

• Auto delete Plus (+) sign when contact read from phone book

Thanks a lot for reading this. For further details please visit SIP Mobile Dialer.

other related:

HelloByte Mobile Dialer is getting Popularity

ZemPlus and Speako Mobile Dialer from SpinyTel

GMS Mobile Dialer supports on many OS Platform

SIMPLE Dialer from DIVINE Informatics Limited

24Dialer – mVoIP Application to make Phone Calls

Pronto Dialer – SIP based MVoIP Application

About iTel Mobile Dialer Express and Hybrid Dialer

Mir Technologies introduced mTel Dialer

MoSIP Dialer – SIP based Application from VoxValley

Knight Dialer provide Crystal Clear Voice Quality

Cool Mobile Dialer from Synchronous

Some Features of Star Dialer

gPlex Mobile Dialer and it’s Key Features

Wholesale A 2 Z Destination Route

Pioneer Mobile Dialer in Bangladesh

Quality White CLI route at Flexible rate

Quality CLI and Non-CLI Route Provider

Mobile Dialer for KSA, Dubai-UAE, Oman, Qatar and others

About gPlex Mobile Dialer and it’s Features

Users can make VoIP phone calls using an internet enabled handset through gPlex Mobile Dialer. Before using this software users need to download it from internet. The software runs in both Symbian and Android platform and is compatible with WiFi / GPRS / 3G / 4G data network. gPlex Mobile Dialer service offers service provider flexible branding and customization options. gPlex Mobile Dialer now supports all types “ANDROID OS” phones. gPlex Dialer version also runs on iPhone.

Key Features of gPlex Mobile Dialer:

• Easy call using GPRS/3G/WiFi

• Display account balance on Mobile phone

• Display Talk time on Mobile phone

• User can refill balance by mobile phone

• Display Talk Time

• Easy refill from dialer

• Loud Speaker

• Users can make Calls from the contact lis

• Call Log can see on Mobile phone screen

• Multiple IVR support

• Compatible now Nokia N series and E series (Symbian S60 3rd Edition), Android OS supported handsets and iPhone.

• Easy to operate

• Bypass any Firewall / Block

• Bundle with light weight audio codec

• And more . . .

Standard Dialer (with Turbo):
Turbo version of the gPlex Mobile Dialer has been developed using advanced compression and efficient jitter buffer handling techniques. It uses extremely low bandwidth (13kbps to 15kbps) on g.729 codec. Since Turbo version of the gPlex Mobile Dialer can bypass firewall/blocks in many countries in the world it is incumbent upon the users to use it in compliance with local telecom regulations.

For the latest / updated prices and packages for gPlex Mobile Dialer please visit the web portal of gPlex Mobile Dialer.

Business Express:
gPlex has a new version dialer with affordable price for the VoIP business entrepreneur. Dialer software has been designed keeping the requirements of VoIP service providers in mind which allows hosting turbo to client co-location even with a low configured server.

gPlex Mobile Dialer Premium Version:
gPlex introduced another special of Mobile Dialer version called “PREMIUM” dialer for your own branded Logo. No brand PIN required for the Premium dialer. You can set your own company branded Logo / icon according to your choice. You can set your branded header on your choice and website address at the footer. In this version 4 switch IPs are allowed for load balancing. It supports for maximum 5000 concurrent calls.

Thanks a lot for reading this post, for latest News and update please visit gPlex Mobile Dialer.

other related:

HelloByte Mobile Dialer is getting Popularity

ZemPlus and Speako Mobile Dialer from SpinyTel

GMS Mobile Dialer supports on many OS Platform

24Dialer – mVoIP Application to make Phone Calls

About iTel Mobile Dialer Express and Hybrid Dialer

Pronto Dialer – SIP based MVoIP Application

SIMPLE Dialer from DIVINE Informatics Limited

Mir Technologies introduced mTel Dialer

MoSIP Dialer – SIP based Application from VoxValley

Cool Mobile Dialer from Synchronous

Some Features of Star Dialer

SIP Mobile Dialer – for Small and Mid size VoIP Business

Knight Dialer provide Crystal Clear Voice Quality

Wholesale A 2 Z Destination Route

Pioneer Mobile Dialer in Bangladesh

Quality White CLI route at Flexible rate

Quality CLI and Non-CLI Route Provider

Mobile Dialer for KSA, Dubai-UAE, Oman, Qatar and others

Call Back and Call Through Dialer from iTel

This is a review post about iTel Mobile Call Back Dialer and iTel Call Through Dialer from REVE Systems.

iTel Mobile Call Back Dialer:

iTel Mobile Call Back Dialer is a mobile client which has been developed to make call back service easy. This callback software is compatible with several OS such as Symbian, Windows Mobile and Blackberry platforms. The end user experience is same as making a regular call from the phone.

iTel Mobile Call Back Dialer helps call back service providers solve various issues faced by customers such as:

• Longer time to connect a call
• Complicated process of use
• Entering long PIN number
• Need to remember or write down destination number and enter the same
• Making mistakes in the entry and paying for the delay
• Higher call costs

Let your customers experience hassle free mobile call back service with this amazing VoIP mobile application.

iTel Mobile Call Back Dialer facilitates callback service. The highlighting features of this app are listed below:

• Full branding opportunity for service providers
• Phone book integration
• Call log information on screen
• Excellent sound quality
• Fully automated/hassle free callback procedure
• Easy integration with existing call back infrastructure
• Easy integration with phonebook
• Supports mobile handsets of several brands such as Nokia, Samsung, Blackberry, HTC, Motorola, Sony, HP, BenQ, Toshiba and many more, which benefits callback service provider agency.
• Can run on the phone background, without restricting the users from performing various other operations such as reading messages, checking contacts etc.
• Different routing options can be implemented such as all local calls will go through the telecom and all international calls will go through the VoIP solutions provider or any other combination
• This callback software can be distributed by Web, WAP and OTA.

iTel Mobile Call Through Dialer:

iTel Mobile Call Through Dialer is a mobile application which eliminates the hassle of remembering the access number, PIN and the destination number, while using a calling card. This mobile application integrates with the phonebook of the mobile phone and makes the calling card service as seamless as dialing a regular phone number from the mobile phone.

iTel Mobile Call Through Dialer stores all the details like access number or PIN number in its memory on the first usage. This way your customers get the relief from entering these details every time when using the calling and enjoy PIN-less calling experience.

This mobile application is compatible with iPhone, Symbian, Windows Mobile, Blackberry and Android platforms providing flexibility to the users. Enable your customers with the easiest way of using your calling card service from mobile phones with this calling cards software.

Now with iTel Mobile Call Through Dialer, relax your calling card customers from the below mentioned problems:

• Longer time to connect
• Complicated system of use
• Need to enter a long PIN number
• Need to memorize or write down destination number and enter the same
• Making mistakes in the entry and paying for the delay
  Higher call costs

Features of iTel Mobile Call Through Dialer:

• Full branding opportunity for service providers
• Customers need not remember or enter the access number or PIN every time, while using the calling card. On the first usage, the dialer stores it in the memory for future use
• Integrates with mobile handsets phonebooks
• Saves time in entire operation leading to cost savings and better user experience
• Call log and balance display facility
• Fully automated/hassle free calling card usage
• Software can be distributed by Web, WAP, OTA

How your customers will use the service:

In order to use iTel Mobile Call Through Dialer, your customers will follow these steps:

• Download the branded dialer from website or your respective app store
• Dialer configuration process
• Access Number (The access number is pre-configured)
• PIN number
• Own phone number
• Launch dialer
• Select destination number from phonebook
• Press Call button
• Call will connect automatically

Thanks a lot for reading, for further details please visit the web portal of iTel Mobile Dialer.

other related:

HelloByte Mobile Dialer is getting Popularity

ZemPlus and Speako Mobile Dialer from SpinyTel

GMS Mobile Dialer supports on many OS Platform

24Dialer – mVoIP Application to make Phone Calls

SIMPLE Dialer from DIVINE Informatics Limited

Pronto Dialer – SIP based MVoIP Application

About iTel Mobile Dialer Express and Hybrid Dialer

Mir Technologies introduced mTel Dialer

MoSIP Dialer – SIP based Application from VoxValley

Cool Mobile Dialer from Synchronous

Knight Dialer provide Crystal Clear Voice Quality

Some Features of Star Dialer

SIP Mobile Dialer – for Small and Mid size VoIP Business

gPlex Mobile Dialer and it’s Key Features

Wholesale A 2 Z Destination Route

Pioneer Mobile Dialer in Bangladesh

Quality White CLI route at Flexible rate

Quality CLI and Non-CLI Route Provider

Mobile Dialer for KSA, Dubai-UAE, Oman, Qatar and others

About iTel Mobile Dialer Express and Hybrid Dialer

A Mobile Dialer, also called a soft dialer, is an application that allows cell phone users to make Voice over Internet Protocol (VoIP) calls using a mobile phone through the Internet connection. The practice of making and completing calls using this method is often referred to as Mobile Voice Over Internet Protocol (mVoIP or MobileVoIP). The cost of making calls using Mobile dialer is lower than direct cell phone / land phone calls.

Mobile VoIP solutions from REVE Systems have brought drastic changes in the field. REVE System provides various types of Mobile VoIP Software / products depending on your need. So, now experience the mobility and superior voice quality along with the economics of VoIP with this Mobile VoIP Software.

Below are some of their products reviews:

iTel Mobile Dialer Express:

iTel Mobile Dialer Express is a mobile application, which allows users to make VoIP calls from mobile phones. This Mobile Dialer software has been designed keeping VoIP service providers requirements in mind. iTel Mobile Dialer Express not only lets your clients make VoIP calls from their mobile phones using your VoIP service, but will let you do the branding of your service. Being a service provider, you can run Mobile Dialer software in your own brand.

With the mass deployment of GPRS / 3G / 4G / Wi-Fi networks and with the introduction of cheaper data services, calling from mobile sets using VoIP technology is getting popular day be day across the globe. Hence, iTel Mobile Dialer Express provides opportunity to service providers to earn good amount of revenue by enabling them to offer VoIP services.

Some Key Features and Specifications of iTel Mobile Dialer Express:

• Integration with mobile phonebook: For VoIP calling, this VoIP dialer integrates with mobile phonebook.
• Balance information: Clients can check their account balance on the mobile phone screen or they can hear account balance information through IVR (Interactive Voice Response).
• iTel Mobile Dialer Express supports 3G, 4G, GPRS and Wi-Fi for internet connectivity.
• Blockage can’t stop Mobile VoIP: In association with iTel Byte Saver, this VoIP dialer works efficiently. It can pass through any firewall or blocked network.
• Runs behind NAT or private IP.
• Customizable with Enhanced Branding Options: iTel Mobile Dialer Express can be fully customized. It can be branded according to your requirements. You can run the dialer under your own brand name. Clients can download this mobile SIP app with full configuration of your service (i.e. switch IP, port, brand name, balance display etc). Your client does not need to configure anything except inserting PIN of their account.
• Available on Multiple Platforms: This SIP dialer runs on Symbian, iPhone, Windows Mobile 5 & 6, Blackberry (GSM and CDMA) and Android platforms / operating systems. For detailed compatibility list of supported handsets, please click here.

Technical Specifications of iTel Mobile Dialer Express:

• Protocol: Session Initiation Protocol (SIP).
• Supported Platforms: Symbian, Windows Mobile, Blackberry, iPhone and Android.
• Supported Codecs: g729, AMR, GSM and g711.
• Compatibility with various types of SoftSwitches: this mobile SIP app is compatible with all standard SIP softswitches.

iTel Mobile Hybrid Dialer:

iTel Mobile Hybrid Dialer is a mobile application, which automates the use of calling cards and provides IP calling facility. This PIN-less calling software allows users to make VoIP calls from their mobile phones. For internet connectivity, iTel Mobile Hybrid Dialer supports 3G/4G and GPRS.

Users can get automated PIN-less calling card usage experience, which means they need not require to remember the access number, PIN number, and destination number, every time while using a calling card.

For VoIP calling and calling cards usage, iTel Mobile Hybrid Dialer directly integrates with the phone book of the mobile user. Hence, calling card users can now not only go PIN – less but also number – less as they need not dial any destination number.

Being a service provider, now you can offer twin advantages to your customers as with this single PINless calling software app, you can allow them to make VoIP calls from their mobile phones as well as use calling cards in an automated way.

iTel Mobile Hybrid Dialer supports iPhone, Android and BlackBerry platforms, which provides flexibility to the users. As a service provider, you can also run the iTel Mobile Hybrid Dialer under your own brand name.

Some Features of iTel Mobile Hybrid Dialer:

• A single application for Mobile VoIP and PINless Calling Cards usage
• Provides mobile friendly calling card experiences
• Integrates with mobile phone book
• Complete branding opportunity for service providers
• Supports iPhone, Android and BlackBerry platforms
• Freedom from remembering access number, PIN number and destination number
• Display of account balance facility

Thanks a lot for reading, for further details please visit the web portal of iTel Mobile Dialer.

other related:

HelloByte Mobile Dialer is getting Popularity

ZemPlus and Speako Mobile Dialer from SpinyTel

GMS Mobile Dialer supports on many OS Platform

24Dialer – mVoIP Application to make Phone Calls

SIMPLE Dialer from DIVINE Informatics Limited

Pronto Dialer – SIP based MVoIP Application

Call Back and Call Through Dialer from iTel

Mir Technologies introduced mTel Dialer

MoSIP Dialer – SIP based Application from VoxValley

Cool Mobile Dialer from Synchronous

Some Features of Star Dialer

Knight Dialer provide Crystal Clear Voice Quality

SIP Mobile Dialer – for Small and Mid size VoIP Business

gPlex Mobile Dialer and it’s Key Features

Wholesale A 2 Z Destination Route

Pioneer Mobile Dialer in Bangladesh

Quality White CLI route at Flexible rate

Quality CLI and Non-CLI Route Provider

Mobile Dialer for KSA, Dubai-UAE, Oman, Qatar and others

VOS3000 Softswitch – For Carrier Class VoIP Operation

This post is a about one of the best and popular VoIP call management softswitch in the world named VOS3000. This blog contains some basic tutorials of VOS3000 softswitch in the earlier posts. Please see at the below to see all the tutorial links.

VOS3000 Softswitch is designed for carrier-class operations by Kunshi Network Technology Co., Ltd. In addition to providing Account Management, Exchange Rate Management, Rate Management, Package Management, Cards Management, Gateway Management, Phone Management, Softswitch Management, IVR Management, System Management, User Management, Data Query and Web Self-Service System. The system also integrates add-on modules like the Global Card Business System (support 10 million cards) and Extreme Media Proxy, for you to build a stable, reliable and High-Performance operating system.

VOS3000 softswitch supports SIP / H323 / SIP-H323, with a capacity up to 10,000 concurrent calls (CC). After rigorous testing, the VOS3000 softswitch proves to be a stable and reliable high-performance carrier-class system in the VoIP market.

System Performance:

• Single server:  up to 10,000 concurrent calls
• Media forwarding capability: 4,000 concurrent calls
• Call per second: 1200CPS (4,320,000BHCA)
• Supported Protocol: SIP, H323, HTTP, TCP/UDP

Some features of VOS3000 System:

• For VoIP operators
• Routing by ASR, LCR (least cost routing)
• Gateway group, preset profit rate
• Voice codec priority setting
• Softswitch platform Control
• Support voice, fax and video calls
• Overload protection, load balancing, redundancy backup mechanism
• Card management business, achieve millions of global cards business model with IVR
• Efficient media access transponder modules, media forwarding up to 4000 concurrent calls
• Multi-server distributed placement, centralized management
• Excellent compatibility
• Multi-gateway encryption standard
• Connect analysis, interruption analysis
• Real-time monitoring for Call Performance
• Package features, providing daily, monthly, annual rent and other methods
• Add the phone area code automatically
• Only one number links you
• Value-added business expansion
• Best services and technical support

Applications of VOS3000 Softswitch:
* Carrier-class VoIP operators.
* VoIP voice network construction and value-added business applications for Large Enterprise customers.
* Millions of global cards business system.
* Call Center, IP Enterprise PBX and other value-added services platform.

For further details please visit http://www.vos3000.com/

other related posts:

VoIP Product from REVE Systems – iTel Switch Plus

Retail and Wholesale VoIP using gPlex Softswitch

Class 5 VoIP Softswitch from VoIPSwitch

Rate Management in VOS300 Softswitch

How to Create an Account in VOS3000

How to create Agent Account in VOS Softswitch

Routing Gateway Management in VOS – General

Gateway Management in VOS – Routing and Period Control

Routing Gateway in VOS3000 -Advanced Settings

Mapping Gateway in VOS3000 Softswitch – 1

Class 5 VoIP Softswitch from VoIPSwitch

This is a review post about the Class 5 VoIP Softswitch from VoIPSwitch.com. VoipSwitch’s all-in-one solution is a complete suite of SIP network elements for VoIP carriers on a single platform. This platform enables service providers to build scalable and reliable VoIP services which can range from small single server deployments to cluster solutions handling thousands of concurrent sessions.

VoipSwitch also comprises a set of functions encapsulated in the term Business Support System / Operation Support System (BSS / OSS). Their role is to provide users billing, charging, provisioning, management and other supporting utilities.

The SIP protocol defines several functional components. These functional entities can be implemented as a separate server, or the same server can perform multiple functions. VoipSwitch’s class 5 softswitch acts as:

Proxy server: Performs call routing, authentication, authorization and address resolution.

Registrar server: User Agents register their location with a registrar server, which places that information into a location database. A registrar server responds to location requests from other servers.

Location server: This server maintains the location database for registered User Agents.

Back-to-back user agent (B2BUA): This server acts as a User Agent server and client at the same time. It terminates the signaling from the calling client and then initiates signaling to the called party. B2BUAs are allowed to change the content of requests, giving them more control over the call parameters.

Presence server: This server gathers presence information from Presentities and subscription information from Watchers, and sends status notifications.

VoipSwitch enables the following:

• The solution’s target market is wholesale carriers, ISPs, MVNOs, Telecoms, and OTT providers.
• Cutting edge retail services from Calling cards through Callback to Callshops.
• Next generation residential telephony with VoIP Portal and Provisioning for devices
• Mobile VoIP with Rich Communication Suite for smartphones and tablets.
• Feature-rich Unified Communication/PBX system in the cloud for your enterprise customers.
• Multilayered ownership structure to support your reseller/partner channels and networks of sales agents

Some Special Features of VoIPSwitch:

Multilayered Account Structures:

• Provider
• Reseller Level
• Agents

System:

• Call Control Functions
• Billing System
• Provisioning
• User Management

User Experience:

• Self Care Portal
• Online Payments
• Mobility
• Rich Communication

For Customers:

• Carriers – Termination, SIP Trunks
• Business – Unified Communication
• Retail – Residential VoIP, RCS Mobile VoIP, Calling Cards

For further details please visit the website: VoIPSwitch.

other related posts:

VoIP Product from REVE Systems – iTel Switch Plus

Retail and Wholesale VoIP using gPlex Softswitch

VOS3000 Softswitch  – For Carrier Class VoIP Platform

Retail and Wholesale VoIP using gPlex Softswitch

This post is about another branded Softswitch for VoIP call handling called gPlex. gPlex is a comprehensive and scalable VoIP Softswitch. It enables establishment of secure and reliable VoIP networks, which can be used in both retail and wholesale VoIP platform.

Retail VoIP Soft Switch:

Hosted gPlex Softswitch for retail service is a cost effective alternative to acquiring expensive carrier grade softswitch. The service is offered in sizes ranging from 100 to 1000 channels. It comes with user-friendly web-interface enabling flexible routing, real-time monitoring and offers reliable billing. Users may operate hosted gPlex®Softswitch even using an Internet enabled cell phone.

Some Features of gPlex Hosted Retail Softswitch:

• Customize the switch according to your taste, Branding the switch with your Logo, Header and Footer branding, Colorful themes for your switch.
• 99.9% uptime
• Easy user-friendly web interface
• Centralized login panel for all the users
• Talk time and Balance IVR
• Calling card module option
• Redundant IP network in hot-standby mode and Redundant power supply with dual power drop
• Unlimited rate plan and Multi level rate editing
• Active calls status
• Live console
• Intelligent routing
• Multiple routing to same IP
• Reseller level up to 4
• Hourly traffic report
• Real-time ASR, ACD, PDD
• Registration graph
• Channel utilization graph
• Support CSV format rate sheet modification & upload

Wholesale VoIP Softswitch:

You can handle up to10000 Calls on a single platform using gPlex Wholesale Softswitch. gPlex GEEK 10000 is specially designed for Carrier-class VoIP operators. GEEK is a powerful combination of scalability and rich functionality, bringing revenue-generating opportunities to carriers globally. In addition to all the carrier grade features, its firewall control option & Multi-level permissions for user’s access to the system makes it most secured integrated system so far.

Some Features of gPlex Hosted Wholesale Softswitch:

• Easy user-friendly web interface
• Call Origination and Termination under same platform
• Can handle up to 10,000 Concurrent Calls (CC)
• Active calls status
• Transparently protocol conversion
• Media servers update without interruption
• Multi-level permissions for user’s access to the system depending on user’s profile
• Live console and Hourly traffic report
• Built in firewall control option
• Intelligent routing and Multiple routing to same IP
• Real-time ASR, ACD, PDD
• Channel utilization graph
• Support CSV format rate sheet modification and upload

Some special Features:

Supported Protocols:

• SIP v.2.0 (RFC 3261, RFC 4566)
• H.323 v.6 (H.245 v.13, H.225 v.6)
• Transparently protocol conversion

Codecs in Pass through mode:

• g729(a,b,ab)
• g723(5.3,6.3)
• g711(u-law,a-law)

Proxy:

• Full proxy mode (topology hiding)
• No proxy mode (signaling only)

Authorization:

• By Static Public IP and prefix

Reports:

• Real time CDR’s monitoring (ASR, ACD)
• Different Filtering options
• Export to excel or csv format
• Call and traffic view

Statistical reports based on:

• routes / clients
• providers
• hours (days, weeks, month)

Configuration and administration:

• Billing update without call interruption
• Media servers update without interruption
• WEB-based interface
• Multi-level permissions for user’s access to the system depending on user’s profile

Other:

• Built in firewall control option.

Thanks a lot for reading this, for further details please visit the web portal of gPlex Softswitch provider.

other related posts:

VoIP Product from REVE Systems – iTel Switch Plus

Class 5 VoIP Softswitch from VoIPSwitch

VOS3000 Softswitch  – For Carrier Class VoIP Platform

VoIP Product from REVE Systems – iTel Switch Plus

This post is a review post about one of the VoIP Softswitch in the market from REVE Systems, called iTel Switch Plus. Based on the information provided on their site: iTel Switch Plus is a comprehensive and dynamic carrier grade solution through its most significant innovation from REVE Systems. ITel Switch plus is a brand which can be used in both retail and wholesale VoIP platform. It provides exclusive solution for the global VoIP industry by keeping the market situation and the business need.

Integrated billing, Multi-level reseller support, easy end user interface and class 4 & 5 softswitch features are some of the exiting features of iTel Switch Plus. This softswitch has other important attributes such as reporting and monitoring tools, enhanced multi-tier security, distributed architecture, supporting multi-model origination devices and termination options. Due to these features, iTel Switch Plus becomes an ideal platform for all ITSP’s who want to provide service to retail consumers for their customer needs. The iTel Switch Plus platform has been designed to meet the highest needs of carriers with multiple termination routes and has enough versatility to be used for traffic origination across calling card, call shop, IP devices, PC softphones (PC2Phone), DID’s and mobile VoIP applications.

Features of iTel Switch Plus SoftSwitch:

Switch and Reseller Partitioning:
iTel Switch Plus has the switch partitioning option. By using this tool user can create multiple new switch by dividing the existing one which makes the softswitch more versatile. In case of Switch partitioning, administrator can make partition of the softswitch and can distribute a brand new switch to his clients. Moreover in Reseller Partitioning, administrator can create a new customized billing interface for his resellers.

Advance Routing Management:
iTel Switch Plus offers flexible routing between VoIP networks with reliability and high scalability. iTel Switch Plus supports various routing systems including Priority Base Routing, Time Base Routing, Loss Less Routing, Quality Base Routing, Percentage base routing, Quality Base LCR routing, Least Cost Routing, Error Code Base Routing, Port capacity Base Routing, Translation Base Routing and many more.

Multi Layered Security:
iTel Switch Plus is powered with two levels of protection- primary and secondary. The primary protection is an IP and Password based authentication that restricts any kind of unauthorized IP access on the network. The secondary layer protection is the use of the iTel Security device, it is an electronic device, which generates a One Time Password (OTP) or security code, required to be entered, at the time of logging in to iTel Switch Plus. This ensures more security of the owner.

Fastest Call Connectivity:
iTel Switch Plus is the fastest class 4 softswitch, class 5 softswitch which allows instant connectivity on VoIP calls. This helps you offer better call quality to your end users, which can potentially increase your calling minutes phenomenally, thereby helping you to get ahead of your competitors.

Create ‘N’ level of resellers:
Generally, most softswitch in the VoIP market allows two or three levels of reseller’s creation. iTel Switch Plus on the other hand gives you the flexibility to create ‘N’ level of VoIP reseller at any level, you can offer level-1,2 3,4 … to your clients. Moreover user can also restrict the level if they want.

Single PIN for all call origination devices:
iTel Switch Plus makes it possible for end users to transfer balances from their account to others under the same reseller. The facility is user-friendly and does not require the involvement of the reseller in the process. The transferor can transfer the whole or part of their balance to any other PIN and this transaction can be done any number of times, without any limitation and subject to availability of balance in the PIN.

Runs behind NAT or on private IP:
In association with iTel Byte Saver (REVE’s proprietary technology), iTel Switch Plus can work behind NAT (Network Address Translation) or private IP. So VoIP service providers now can make sure that their service is available in blocked or firewalled networks.

Never Go Negative (NGN):
NGN is a next generation billing feature that intelligently prevents user account balance from going negative. This feature of the SIP softswitch is specially developed in order to prevent the losses incurred by many resellers.

Supports International Mobile Top Up:
Mobile Top Up on iTel Switch Plus enables m-commerce on IP Networks and is first of its kind initiative in the VoIP industry. Mobile Top Up (MTU) on iTel Switch Plus enables VoIP softswitch service providers with international Mobile Top Up facility. Being a service provider, now you can recharge any mobile number from any location using the same PIN which you use for other call origination devices (PC to Phone, Mobile Dialer, Call back Dialer etc).

Protocol conversation:
It’s time to say goodbye to single protocol supported switch. iTel switch has the provision to translate SIP to H323 protocol and H323 to SIP.

Advanced client and Rate Plan Management:
iTel Switch Plus is loaded with advanced client and rate plan management facilities. By using this module, users will enjoy in making different retailer and wholesaler and also assign them different originating and terminating rate plan.

Organized Monitoring Facility:
iTel Switch Plus is designed from an administrator’s point of view. iTel Switch Plus has the radical monitoring facilities which helps the administrator take any decision.

Can trace all billing activities:
iTel Switch Plus is superior than any other softswitch because our system can trace all billing activities. Its help track changed, updated, and deleted information by any other existing user.

Behavior Based Alarm System:
iTel Switch Plus conveys behavior based alarm to admin in case of any emergency situation occurred by server based, security based, revenue based and performance based.

Supports IVR in multiple languages:
iTel Switch Plus supports IVR (Interactive Voice Response) in multiple languages such as English, Bangla, French, Spanish, Turkish, Arabic etc, use can hear their remaining balance.

PIN to PIN calling and balance transfer facility:
‘iTel Switch Plus allows service providers to handle PIN-to-PIN incoming calls and also facilitates peer-to-peer calling among resellers. iTel Switch Plus makes it possible for end users to transfer balances from their account to others under the same reseller.

Thanks a lot for reading this post, please visit the web portal of the provider of iTel Switch Plus – REVE Systems.

other related posts:

Retail and Wholesale VoIP using gPlex Softswitch

Class 5 VoIP Softswitch from VoIPSwitch

VOS3000 Softswitch  – For Carrier Class VoIP Platform